Domain-Authentication-Key - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

domain-authentication-key

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
domain-authentication-key [ 0 | 8 ] authKey
no domain-authentication-key
Command introduced before JunosE Release 7.1.0.
Assigns a password for authentication of IS-IS level 2 LSPs, CSNPs, and PSNPs. The no
version deletes the password.
NOTE: Issuing this command enables simple authentication of level 2 LSPs
only. To enable authentication of level 2 CSNPs or PSNPs, use the
domain-authentication command.
0—indicates the authKey is entered in unencrypted form (plaintext); this is the default
option
8—indicates the authKey is entered in encrypted form (ciphertext)
authKey—password; string of up to 8 characters
Router Configuration
Chapter 5: D Commands
535