Table of Contents
Advertisement
ipsec isakmp-policy-rule
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
ipsec isakmp-policy-rule priority
no ipsec isakmp-policy-rule [ priority ]
Command introduced before JunosE Release 7.1.0.
Defines and prioritizes an ISAKMP/IKE policy. ISAKMP/IKE policies define parameters to
be used during ISAKMP/IKE negotiation. You can have up to 10 ISAKMP/IKE policies per
router. The no version removes a policy. If you do not include a priority number with the
no version, the software removes all ISAKMP/IKE policies.
NOTE: This command has been replaced by the ipsec ike-policy-rule
command and may be removed completely in a future release.
priority—Identifies and prioritizes the ISAKMP/IKE policy; in the range 1–10000, with 1
having the highest priority
Global Configuration
Chapter 10: I Commands
995
Advertisement
Table of Contents
