Lsp-Refresh-Interval - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

lsp-refresh-interval

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
lsp-refresh-interval seconds
no lsp-refresh-interval
Command introduced before JunosE Release 7.1.0.
Sets the link-state packet rate at which locally generated IS-IS link-state packets are
periodically transmitted. The no version restores the default value, 900.
seconds—Number in the range 1–65535; the refresh interval in seconds; default value
is 900
Router Configuration
Chapter 12: L Commands
1253