Ip Multicast Admission-Bandwidth-Limit - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

ip multicast admission-bandwidth-limit

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] ip multicast admission-bandwidth-limit limitValue
Command introduced in JunosE Release 7.1.0.
Specifies multicast admission bandwidth (in kilobits per second) for a given interface.
The no version removes the admission bandwidth limit.
limitValue—Maximum admission bandwidth (in kilobits per second) permitted on an
interface; default value is 0, which disables the limit
Interface Configuration, Profile Configuration
Chapter 10: I Commands
857