Interface Tengigabitethernet - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

interface tenGigabitEthernet

Syntax
Release Information
Description
Options
Mode
726
[ no ] interface tenGigabitEthernet interfaceSpecifier
Command introduced in JunosE Release 7.1.0.
Specifies or creates a 10-Gigabit Ethernet interface or a subinterface over a 10-Gigabit
Ethernet interface. The no version removes the interface or subinterface.
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
Global Configuration
Copyright © 2010, Juniper Networks, Inc.