Committed-Action - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

committed-action

Syntax
Release Information
Description
Options
Mode
Related
Documentation
440
For IP and IPv6 rate-limit profiles:
[ no ] committed-action { drop | transmit | mark markVal }
For L2TP rate-limit profiles:
[ no ] committed-action { drop | transmit }
For MPLS rate-limit profiles:
[ no ] committed-action { drop | transmit | mark-exp expValue }
For hierarchical rate-limit profiles:
[ no ] committed-action { drop | transmit [ conditional | unconditional | final ] }
Command introduced before JunosE Release 7.1.0.
conditional, unconditional, and final keywords added in JunosE Release 7.2.0.
Sets the action for packets conforming to the committed rate and committed burst size
and conforming to the exceed rate and exceed burst size for a rate-limit profile. The no
version restores the value to the default value, drop.
drop—Drops the packet
transmit—Transmits the packet; for hierarchical rate limits:
conditional—Packets must pass the next rate limit
unconditional—Packets take resources, but are not affected by the rest of the
hierarchy
final—Packets exit the hierarchy at rate limit
markVal—Value in the range 0–255
expValue—EXP bit value in the range 0–7
Rate Limit Profile Configuration
Creating a Two-Rate Rate-Limit Profile
Copyright © 2010, Juniper Networks, Inc.