Mpls Rsvp Authentication Key - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

mpls rsvp authentication key

Syntax
Release Information
Description
Options
Mode
1398
{ ip | mpls } rsvp authentication [ key authkey ]
no { ip | mpls } rsvp authentication [ key [ authkey ] ]
Command introduced before JunosE Release 7.1.0.
Assigns a key to the interface for MD5 authentication between RSVP peers. Assign the
key before you enable authentication on the interface. The no version deletes the MD5
key.
NOTE: Keys of up to 40 characters are supported for non–Juniper Networks
implementations. However, a key with more than 16 characters will cause an
authenticated link between E Series and M- or T-series routers to be
inoperable.
ip—Specifies alternative keyword for compatibility with non–E Series implementations
mpls—Specifies JunosE MPLS implementation
authkey—Key used to create MD5 digest for messages sent from this interface and to
authenticate messages received on this interface; alphanumeric string in the range
1–40 characters
Interface Configuration
Copyright © 2010, Juniper Networks, Inc.