Table of Contents
Advertisement
ip route-type
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
For BGP:
ip route-type [ unicast | both ]
no ip route-type
For IS-IS, OSPF, and RIP:
ip route-type [ unicast | multicast | both ]
no ip route-type
Command introduced before JunosE Release 7.1.0.
Specifies whether BGP, IS-IS, OSPF, or RIP routes are available only for unicast forwarding,
only for multicast reverse path forwarding checks, or for both. The no version restores
the default value, unicast for BGP or both for IS-IS, OSPF, and RIP.
unicast—Specifies that routes for the protocol are available only for unicast forwarding
multicast—Specifies that routes for the protocol are available only for multicast route
path forwarding checks; this option is not available for BGP
both—Specifies that routes for the protocol are available for both unicast forwarding
and multicast route path forwarding checks
Address Family Configuration (RIP), Router Configuration
Chapter 10: I Commands
927
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 and is the answer not in the manual?
Questions and answers