Table of Contents
Advertisement
frame-relay lmi-n393dce
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
frame-relay lmi-n393dce events
no frame-relay lmi-n393dce
Command introduced before JunosE Release 7.1.0.
Sets the monitored events count (N393) on a DCE interface. The no version removes
current setting and sets the default.
events—Number in the range 1–10 events; specifies the diagnostic window used to
verify link integrity; default value is 2 events (The detection of N392 errors within the
window of N393 samples places the interface in an operationally down state.)
Interface Configuration
Chapter 7: F Commands
645
Advertisement
Table of Contents
