Ip Ssh Sleep - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

ip ssh sleep

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
ip ssh sleep sleepPeriod
no ip ssh sleep
Command introduced before JunosE Release 7.1.0.
Sets a sleep period in seconds for users that have exceeded the authentication retry limit.
Connection attempts from the user at the same host are denied until this period expires.
The no version restores the default value, 600 seconds.
sleepPeriod—Period in the range 0–4294967295 seconds
Global Configuration
Chapter 10: I Commands
951