Mpls Topology-Driven-Lsp - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

mpls topology-driven-lsp

Syntax
Release Information
Description
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] mpls topology-driven-lsp
Command introduced before JunosE Release 7.1.0.
Enables topology-driven LSP creation on the virtual router where the LSR automatically
creates LSPs when it learns a new IGP route. In the context of the VRF virtual router,
enables carrier-of-carriers support on the provider carrier's PE router.
The router advertises labels for new routes immediately to all peers without waiting for
a label request message from an upstream peer or a label mapping message from a
downstream peer. This mode is downstream-unsolicited, independent control.
The no version disables topology-driven LSPs on the virtual router.
Global Configuration
Chapter 13: M Commands
1415