Configuring Radius; Radius Tasks At A Glance; Configuring A Test Profile For Radius Server Status Detection - H3C SR8800-F Configuration Manual

Configuring RADIUS

RADIUS tasks at a glance

Tasks at a glance
(Optional.)

Configuring a test profile for RADIUS server status detection

(Required.)
(Required.)
(Optional.) Specifying the RADIUS accounting servers
(Optional.) Specifying the shared keys for secure RADIUS communication
(Optional.) Specifying an MPLS L3VPN instance for the scheme
(Optional.) Setting the username format and traffic statistics units
(Optional.) Setting the maximum number of RADIUS request transmission attempts
(Optional.) Setting the maximum number of real-time accounting attempts
(Optional.) Configuring RADIUS stop-accounting packet buffering
(Optional.) Setting the maximum number of pending RADIUS requests
(Optional.) Setting the status of RADIUS servers
(Optional.) Enabling the RADIUS server load sharing feature
(Optional.) Specifying the source IP address for outgoing RADIUS packets
(Optional.) Setting RADIUS timers
(Optional.) Configuring the RADIUS accounting-on feature
(Optional.) Interpreting the RADIUS class attribute as CAR parameters
(Optional.) Configuring the Login-Service attribute check method for SSH, FTP, and terminal users
(Optional.) Configuring the MAC address format for RADIUS attribute 31
(Optional.) Configuring the format for RADIUS attribute 87
(Optional.) Setting the data measurement unit for the Remanent_Volume attribute
(Optional.) Specifying a server version for interoperating with servers with a vendor ID of 2011
(Optional.) Configuring the RADIUS attribute translation feature
(Optional.) Configuring the RADIUS session-control feature
(Optional.) Configuring the RADIUS DAS feature
(Optional.) Changing the DSCP priority for RADIUS packets
(Optional.) Configuring the device to preferentially process RADIUS authentication requests
(Optional.) Enabling SNMP notifications for RADIUS
Configuring a test profile for RADIUS server status detection
Use a test profile to detect whether a RADIUS authentication server is reachable at a detection
interval. To detect the RADIUS server status, you must configure the RADIUS server to use this test
profile in a RADIUS scheme.
Creating a RADIUS scheme
Specifying the RADIUS authentication servers
23