Acl Ipv6 Name; Description (For Ipv6) - H3C S3100 Series Command Manual

The source IPv6 ACL and the destination IPv6 ACL must be of the same type.
The new ACL does not take the name of the source IPv6 ACL.
Examples
# Copy ACL 2008 to generate ACL 2009.
<Sysname> system-view
[Sysname] acl ipv6 copy 2008 to 2009

acl ipv6 name

Syntax
acl ipv6 name acl6-name
View
System view
Default Level
2: System level
Parameters
acl6-name: Name of the IPv6 ACL, a case insensitive string of 1 to 32 characters. It must start with an
English letter and cannot be named all to avoid confusion.
Description
Use the acl ipv6 name command to enter the view of an existing IPv6 ACL by specifying its name.
Examples
# Enter the view of the IPv6 ACL named flow.
<Sysname> system-view
[Sysname] acl ipv6 name flow
[Sysname-acl6-basic-2002-flow]

description (for IPv6)

Syntax
description text
undo description
View
Basic IPv6 ACL view, advanced IPv6 ACL view
Default Level
2: System level
Parameters
text: ACL description, a case-sensitive string of 1 to 127 characters.
Description
Use the description command to configure a description for an IPv6 ACL to, for example, describe the
purpose of the ACL.
Use the undo description command to remove the IPv6 ACL description.
4-4