Display Pki Certificate Access-Control-Policy - H3C MSR Series Command Reference Manual

Predefined user roles
network-admin
Parameters
url-string: Specifies the URL of the CRL repository, a case-sensitive string of 1 to 511 characters. The
URL format is ldap://server_location or http://server_location. The URL length is restricted by the CLI
string limitation or the url-string parameter, whichever is smaller.
Usage guidelines
To use CRL checking, a CRL must be obtained from a CRL repository.
The device selects a CRL repository in the following order:
1. CRL repository specified in the PKI domain by using this command.
2. CRL repository in the certificate that is being verified.
3. CRL repository in the CA certificate or CRL repository in the upper-level CA certificate if the CA
certificate is the certificate being verified.
After the previous selection process, if the CRL repository is not found, the device obtains the CRL
through SCEP. In this scenario, the CA certificate and the local certificates must have been obtained.
If an LDAP URL is specified, the device must connect to the LDAP server to obtain the CRL. If the
LDAP URL does not contain the address of the LDAP server, use the ldap-server command to
configure the server address in the PKI domain.
Examples
# Set the URL of the CRL repository to http://169.254.0.30.
<Sysname> system-view
[Sysname] pki domain aaa
[Sysname-pki-domain-aaa] crl url http://169.254.0.30
Related commands
ldap-server
pki retrieve-crl

display pki certificate access-control-policy

Use display pki certificate access-control-policy to display information about certificate-based
access control policies.
Syntax
display pki certificate access-control-policy [ policy-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
policy-name: Specifies a certificate-based access control policy by its name, a case-insensitive
string of 1 to 31 characters.
460