Display Version - H3C S7500 Series Command Manual

Command Manual – System Maintenance and Debugging
H3C S7500 Series Ethernet Switches
0 AUX 0
8 VTY 0
+ 9 VTY 1
12 VTY 4
Table 1-2 Description on the output user terminal interface information
Item
UI
Delay
Type
Ipaddress
Username

1.2.4 display version

Syntax
display version
View
Any view
Parameters
None
Description
Use the display version command to display the information (such as the version
information) about the switch system.
Specifically, you can use this command to check the software version and issue time,
the basic hardware configuration, and some other information about the switch.
Examples
# Display the version of the system.
<H3C> display version
H3C Comware Platform Software
Comware software, Version 3.10, Release 3135
Copyright (c) 2004-2007 Hangzhou H3C Technologies Co., Ltd. All rights
reserved.
H3C S7506R uptime is 0 week, 0 day, 0 hour, 23 minutes
UI Delay Type
00:00:17
01:37:55 TEL
00:00:00 TEL
00:00:00 TEL
User interface
Delay time when no interaction occurs between user and device
User login type
IP address used when login using telnet program
User name
Chapter 1 Basic System Configuration
Ipaddress Username
192.168.0.200
192.168.0.3
192.168.0.115
Description
1-9
and Debugging Commands