Enabling Dynamic Individual Users To Come Online Despite The Ipoe-Nat Collaboration Failure; Configuring Static Individual Users; Static Individual User Configuration Tasks At A Glance; Enabling Static Individual Users - H3C SR8800-F Configuration Manual

Enabling dynamic individual users to come online despite the
IPoE-NAT collaboration failure
If a card that supports NAT collaboration fails, the IPoE-NAT collaboration fails. Perform this task to
enable dynamic individual users to come online despite the collaboration failure. For more
information about NAT, see Layer 3—IP Services Configuration Guide.
To enable dynamic individual users to come online despite the IPoE-NAT collaboration failure:
Step
1. Enter system view.
2. Enter interface view.
3. Enable dynamic
individual users to
come online despite
the IPoE-NAT
collaboration failure.

Configuring static individual users

Static individual user configuration tasks at a glance

Tasks at a glance
(Required.)
(Required.) Perform one of the following tasks at minimum:
•
Configuring static IPoE sessions on an interface
•
Configuring global static IPoE sessions
(Required.)
(Required.)
(Optional.) Configuring ISP domains for static individual users

Enabling static individual users

About enabling static individual users
This feature enables configured static IPoE sessions information to match IP or ARP packets. To
enable static IPoE session information to match ARP packets, you need to enable ARP-based static
individual users.
Restrictions and guidelines
Follow these guidelines for the ARP-based static individual user configuration:
•
The gateway IP address allocated to the static individual users must be one of the following IP
addresses:
The IP address of the access interface.
A gateway address from the gateway address list specified by using the gateway-list
export-route command.
Command
system-view
interface interface-type
interface-number
•
For IPv4 dynamic individual users:
ip subscriber nat-fail online
•
For IPv6 dynamic individual users:
ipv6 subscriber nat-fail online
Enabling static individual users
Configuring authentication user naming conventions for static individual users
Configuring passwords for static individual users
400
Remarks
N/A
N/A
By default, dynamic individual
users cannot come online if the
IPoE-NAT collaboration fails.