Ip Userlog Nat Export Version; Ip Userlog Nat Mode Flow-Begin - H3C S9500 Series Command Manual

Command Manual – NAT
H3C S9500 Series Routing Switches
Use the undo ip userlog nat export source-ip command to restore the default source
IP address of log packets.
Examples
# Set the source IP address of log packets to 169.254.1.1.
<H3C> system-view
[H3C] ip userlog nat export source-ip 169.254.1.1

1.2.6 ip userlog nat export version

Syntax
ip userlog nat export version version-number
undo ip userlog nat export version
View
System view
Parameters
version-number: Version of the output log packets. It is 1 by default. It can only be 1
currently.
Description
Use the ip userlog nat export version command to set the version of log packets.
Use the undo ip userlog nat export version command to restore the default version
of log packets.
Examples
# Set the version of the log packets to 1.
<H3C> system-view
[H3C] ip userlog nat export version 1

1.2.7 ip userlog nat mode flow-begin

Syntax
ip userlog nat mode flow-begin
undo ip userlog nat mode flow-begin
View
System view
Chapter 1 NAT Configuration Commands
1-32