Hardware Management And Maintenance; Displaying Hardware Information For The Router; Displaying The Software And Hardware Version Information For The Router; Displaying The Operational Statistics For The Router - H3C SR6616 Installation Manual

Hardware management and maintenance

The output depends on your router model. For more information about the commands used in this
chapter, see H3C SR6600/SR6600-X Routers Command References.

Displaying hardware information for the router

Displaying the software and hardware version information for
the router
Use the display version command to display software and hardware version information of the
router. The output includes the following information: the current software version and hardware
version, router operating time, type, and operating time of each main processing unit (MPU) and
service module. The output of this command depends on your router model.
<Sysname> display version

Displaying the operational statistics for the router

When you perform routine maintenance or the system fails, you might need to view the operational
information of each functional module for locating failures. Generally, you need to run display
commands one by one. To collect more information one time, you can execute the display
diagnostic-information command in any view to display or save the operational statistics of
multiple functional modules of the router. This command displays the output of the display clock ,
display
commands.
•
To save the operational statistics of each functional module of the router, type y when the
system prompts you to save or display the diagnostic information.
<Sysname> display diagnostic-information
Save or display diagnostic information (Y=save, N=display)? [Y/N]:y
Please input the file name(*.diag)[cfa0:/default.diag]:aa.diag
Diagnostic information is outputting to cfa0:/aa.diag.
Please wait...
Save succeeded.
Execute the more aa.diag command in user view, and then press the Page Up and Page
Down keys to view the contents of the file aa.diag.
•
To display the operational statistics of each functional module of the router, type n when the
system prompts you to save or display the diagnostic information. The output is too much and
omitted here.
<Sysname> display diagnostic-information
Save or display diagnostic information (Y=save, N=display)? [Y/N]:n
=================================================
===============display clock===============
=================================================
08:54:16 UTC Fri 11/12/2017
===================================================
===============display version===============
===================================================
version , display device , and display
60
current-configuration