New Holland T8010 Manual page 1021

Hide thumbs Also See for T8010:

Table of Contents

Section 50 - Climate Control - Chapter 1

The cab temperature sensor must be installed in the

recirculation air stream which enters the HVAC box at

the rear. Do not install the sensor in contact with any

metal surface; see illustration for view from inside the

Since the cab temperature sensor is located behind

the recirculation air filter, any obstruction in the return

air path will reduce system performance: The sensor

will only detect air temperature in the HVAC box and

not the true cab air temperature.

Check the area behind the operator's seat for

obstructions at the recirculation filter, and check the

filter for cleanness before testing the sensor.

Chapters

Table of Contents

T8020 T8030 T8040