Pulldown Control 3 Register (Pull_Dwn_Ctrl_3) - Texas Instruments OMAP5910 Technical Reference Manual

Table 6–45. Pulldown Control 3 Register (PULL_DWN_CTRL_3)
Bit Name
31–14 RESERVED
13 CONF_PDEN_NTRST_R
12 CONF_PDEN_TCK_R
11 CONF_PDEN_TMS_R
10 CONF_PDEN_TDI_R
9 CONF_PDEN_CONF_R
Value Description
Reserved for future expansion. These
bits must always be written as 0.
This bit controls the pulldown enable
on the OMAP5910 I/O, which defaults
to TRST at reset.
0 Pulldown enabled
1 Pulldown disabled
This bit controls the pulldown enable
on the OMAP5910 I/O, which defaults
to TCK at reset.
0 Pulldown enabled
1 Pulldown disabled
This bit controls the pulldown enable
on the OMAP5910 I/O, which defaults
to TMS at reset.
0 Pulldown enabled
1 Pulldown disabled
This bit controls the pulldown enable
on the OMAP5910 I/O, which defaults
to TDI at reset.
0 Pulldown enabled
1 Pulldown disabled
This bit controls the pulldown enable
on the OMAP5910 I/O, which defaults
to CONF at reset.
0 Pulldown enabled
1 Pulldown disabled
OMAP5910 Configuration Registers
R/W
R/W
R/W
R/W
R/W
R/W
R/W
MPU Private Peripherals
Reset
Value
0x00000
0x0
0x0
0x0
0x0
0x0
6-59