Channel Source Destination Parameters Register (Dma_Csdp) - Texas Instruments OMAP5910 Technical Reference Manual

Registers
Table 5–12. Channel Source Destination Parameters Register (DMA_CSDP) (Continued)
Bit Name
12–9 DST
8–7 SRC_BURST_EN
5-42
Value Description
Transfer destination
A unique identifier is given to each port. This field
indicates which port is the originator of the
transfer.
0000 EMIFF
0001 EMIF
0010 IMIF
0011 TIPB
0100 Local
0101 TIPB_MPUI
Others: Illegal (do not use this setting)
Source burst enable
Enable/disable bursting on the source port. When
bursting is enabled, the source port performs
bursts 4 x src_width. When bursting is disabled,
the source port performs single accesses of
src_width bits.
00 Single access (no burst)
01 Single access (no burst)
10 Burst 4
11 Reserved (do not use this setting)
If the source port of the channel has no burst
access capability, this field is ignored.
Reset
Type
Value
RW 0000
RW 00