ETM Environment
Figure 2–26. Trace Signals Multiplexing
OMAP5910
MPU
Pin multiplexing logic
2-76
The ETM trace signals are multiplexed with the camera interface pins on the
OMAP5910 device. The default value upon reset is the camera interface.
Refer to Section 6.8, Configuration Module, and Section A.2, I/O Functional
Multiplexing, for details on pin multiplexing.
Camera
interface
ETM 9
trace _sync
trace _clk
trace _pkt_[7:0]
trace _pipestat_[2:0]
Agilent E5903A 301 TPA
or
16700A series logic analyzer
With E959A 002 TPA