Control Register (Cntl_Reg) - Offset Address (Hex); Fault Address Register Msb (Fault_Ad_H_Reg) - Offset Address (Hex): 0C; Fault Address Register Lsb (Fault_Ad_L_Reg) - Offset Address (Hex) - Texas Instruments OMAP5910 Technical Reference Manual

Table 2–29. Control Register (CNTL_REG) – Offset Address (hex): 08
Bit Function
15–6 Reserved
5 Enables the 16-bit burst management. Active high.
4 Reserved
3 Reserved
2 When 1, enables the walking table logic. When 0, the walking
table is disabled and access to the TLB and lock counter are
disabled.
1 Enables MMU. Active high.
0 Resets module. Active low.
Table 2–30. Fault Address Register MSB (FAULT_AD_H_REG) – Offset Address (hex): 0C
Bit Function
15–9 Reserved
8 The access that generated a permission fault is data when 1 or
program when 0.
7–0 MSB of virtual address of the access that generated a permission
fault
Table 2–31. Fault Address Register LSB (FAULT_AD_L_REG) – Offset Address (hex): 10
Bit Function
15–7 LSB of virtual address of the access that generated a permission
fault
6–0 Reserved
DSP Memory Management Unit
Value at
Hardware
Reset
Size Access
10
1 R
1
1
1 R
1 R
1 R
Value at
Hardware
Size Access Reset
7
1 R
8 R
Value at
Hardware
Size Access Reset
9 R
7
MPU Subsystem
0
0
0
0
0
0
0
2-49