Command Transfer - Texas Instruments OMAP5910 Technical Reference Manual

Figure 7–56. Command Transfer
Send command
(with type response direction)
When a command that has no response is used (that is, CMD0, CMD4,
CMD15), the command timeout condition can never occur, since there is no
response expected. In this case, the NO path from the command timeout clock
is taken, and the timeout interrupt is not valid.
Write MMC_ARG1.
Write MMC_ARG2IE.
Write MMC_CMD.
Yes
Command
Yes
command
Next operation
MPU Public Peripherals
MMC/SD Host Controller
time-out
No
End of
No
7-163