Functional Multiplexing Control C Register (Func_Mux_Ctrl_C) - Texas Instruments OMAP5910 Technical Reference Manual

OMAP5910 Configuration Registers
Table 6–39. Functional Multiplexing Control B Register (FUNC_MUX_CTRL_B) (Continued)
Bits Name
8–6 CONF_MCSI2_DIN_R
5–3 CONF_MCSI2_CLK_R
2–0 RESERVED
Table 6–40. Functional Multiplexing Control C Register (FUNC_MUX_CTRL_C)
Bits Name
31–30 RESERVED
29–27 CONF_TX2_R
26–24 CONF_RTS2_R
23–21 CONF_CTS2_R
6-42
Description
These bits control the multiplexing on the
OMAP5910 I/O, which defaults to MCSI2.DIN at
reset.
The control for this I/O is forced to 000 at reset
and in compatibility mode.
These bits control the multiplexing on the
OMAP5910 I/O, which defaults to MCSI2.CLK at
reset.
The control for this I/O is forced to 000 at reset
and in compatibility mode.
Reserved for future expansion. These bits must
always be written as 0.
Description
Reserved for future expansion. These bits must
always be written as 0.
These bits control the multiplexing on the
OMAP5910 I/O, which defaults to UART2.TX at
reset.
The control for this I/O is forced to 000 at reset and
in compatibility mode.
These bits control the multiplexing on the
OMAP5910 I/O, which defaults to UART2.RTS at
reset.
The control for this I/O is forced to 000'at reset and
in compatibility mode.
These bits control the multiplexing on the
OMAP5910 I/O, which defaults to UART2.CTS at
reset.
The control for this I/O is forced to 000 at reset and
while in compatibility mode.
Reset
R/W
Value
R/W 0x0
R/W 0x0
R/W 0x0
Reset
R/W
Value
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0