Functional Multiplexing Control A Register (Func_Mux_Ctrl_A) - Texas Instruments OMAP5910 Technical Reference Manual

OMAP5910 Configuration Registers
Table 6–38. Functional Multiplexing Control A Register (FUNC_MUX_CTRL_A)
Bits Name
31–27 RESERVED
26–24 CONF_MMC_DAT1_R
23–21 RESERVED
20–18 CONF_MMC_DAT2_R
17–15 RESERVED
14–12 CONF_CLK32K_OUT_R
11–9 CONF_MCSI1_DIN_R
8–6 CONF_MCSI1_BCLK_R
6-40
Description
Reserved for future expansion. These bits must
always be written as 0.
These bits control the multiplexing on the
OMAP5910 I/O, which defaults to MMC.DAT1 at
reset.
As long as the STATIC_VALID pin is sampled high
upon reset, the control for this I/O is force to 000
at reset and while in compatibility mode.
STATIC_VALID must sample high at reset for the
associated OMAP5910 pin to function properly.
Reserved. These bits must always be written as 0.
These bits control the multiplexing on the
OMAP5910 I/O, which defaults to MMC.DAT2 at
reset.
As long as the STATIC_VALID pin is sampled high
upon reset, the control for this I/O is force to 000
at reset and while in compatibility mode.
STATIC_VALID must sample high at reset for the
associated OMAP5910 pin to function properly.
Reserved for future expansion. These bits must
always be written as 0.
These bits control the multiplexing on the
OMAP5910 I/O, which defaults to CLK32K_OUT
at reset.
The control for this I/O is forced to 000'at reset
and in compatibility mode.
These bits control the multiplexing on the
OMAP5910 I/O, which defaults to MCSI1.DIN at
reset.
The control for this I/O is forced to 000 at reset
and in compatibility mode.
These bits control the multiplexing on the
OMAP5910 I/O, which defaults to MCSI1.CLK at
reset.
The control for this I/O is forced to 000'at reset
and in compatibility mode.
Reset
R/W
Value
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0