Functional Multiplexing Control D Register (Func_Mux_Ctrl_D) - Texas Instruments OMAP5910 Technical Reference Manual

OMAP5910 Configuration Registers
Table 6–41. Functional Multiplexing Control D Register (FUNC_MUX_CTRL_D)
Bits Name
31–15 RESERVED
14–12 CONF_MMC_DAT3_R
11–9 RESERVED
8–6 CONF_NFCS2_R
5–0 RESERVED
6-44
Description
Reserved for future expansion. These bits must
always be written as 0.
These bits control the multiplexing on the
OMAP5910 I/O, which defaults to MMC.DAT3 at
reset
The control for this I/O is forced to 000 at reset.
Reserved for future expansion. These bits must
always be written as 0.
These bits control the multiplexing on the
OMAP5910 I/O, which defaults to FLASH.CS2 at
reset.
The control for this I/O is forced to 000 at reset.
Reserved for future expansion. These bits must
always be written as 0.
Reset
R/W Value
R/W 0x00000
R/W 0x0
R/W 0x0
R/W 0x0
R/W 0x0