Functional Multiplexing Control 5 Register (Func_Mux_Ctrl_5) - Texas Instruments OMAP5910 Technical Reference Manual

Table 6–32. Functional Multiplexing Control 4 Register (FUNC_MUX_CTRL_4) (Continued)
Bits Name
23–21 CONF_CAM_EXCLK_R
20–18 RESERVED
17–15 CONF_MCBSP1_DOUT_R
14–12 CONF_MCBSP1_SYNC_R
11–0 RESERVED
Table 6–33. Functional Multiplexing Control 5 Register (FUNC_MUX_CTRL_5)
Bits Name
31–30 RESERVED
29–27 CONF_CAM_RSTZ_R
Description
These bits control the multiplexing on the
OMAP5910 I/O, which defaults to CAM.EXCLK at
reset.
The control for this I/O is forced to 000 at reset
and while in compatibility mode.
Reserved for future expansion. These bits must
always be written as 0.
These bits control the multiplexing on the
OMAP5910 I/O, which defaults to MCBSP1.DX at
reset.
The control for this I/O is forced to 000 at reset
and while in compatibility mode.
These bits control the multiplexing on the
OMAP5910 I/O, which defaults to MCBSP1.FSX
at reset.
The control for this I/O is forced to 000 at reset
and while in compatibility mode.
Reserved for future expansion. These bits must
always be written as 0.
Description
Reserved for future expansion. These bits must
always be written as 0.
These bits control the multiplexing on the
OMAP5910 I/O, which defaults to CAM.RSTZ at
reset.
The control for this I/O is forced to 000 at reset
and in compatibility mode.
OMAP5910 Configuration Registers
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
MPU Private Peripherals
Reset
Value
0x0
0x0
0x0
0x0
0x0
Reset
Value
0x0
0x0
6-33