I2S Audio Codec Interface; Mcbsp1 Application Example: I2S Interface - Texas Instruments OMAP5910 Technical Reference Manual

Hide thumbs Also See for OMAP5910:

Table of Contents

Figure 9–3. I2S Audio Codec Interface

This application uses McBSP1 as an I2S audio codec interface (see

Figure 9–3). The OMAP5910 is intended to be either the master or slave

device; that is, it either receives or provides the frame synchronization and bit

Section 9.3.4.1 through Section 9.3.4.9 explain how to set up the McBSP

registers for I2S slave mode with 16-bit transfers using DMA support.

DSP Public Peripherals

supporting I2S

standard interface