Chapter 1 Bfd Configuration Commands; Bfd Configuration Commands; Bfd Authentication-Mode - H3C S3610 Series Command Manual

Command Manual – BFD-GR
H3C S3610&S5510 Series Ethernet Switches

Chapter 1 BFD Configuration Commands

1.1 BFD Configuration Commands

1.1.1 bfd authentication-mode

Syntax
bfd authentication-mode{md5 key-id key | sha1 key-id key | simple key-id
password }
undo bfd authentication-mode
View
Interface view
Parameters
md5: Uses message digest 5 (MD5) authentications.
sha1: Uses secure hash algorithm (SHA-1) authentication.
simple: Uses plaint text authentication.
key-id: Authentication key ID, in the range 1 to 255.
key: A string of 1 to 16 characters. It is displayed as a 24-byte cipher text string when
the display current-configuration command is executed.
password: Password, a string of 1 to 16 characters when the simple keyword is used. It
is displayed when the display current-configuration command is executed.
Description
Use the bfd authentication-mode command to configure the BFD authentication
mode and key on the interface.
Use the undo bfd authentication-mode command to remove the authentication mode
on the interface (only one authentication mode can be configured on an interface).
By default, no authentication is configured on an interface.
Chapter 1 BFD Configuration Commands
1-1