Lacp System-Priority; Link-Aggregation Group Description - H3C s3100 series Command Manual

Parameter
port-priority: Port priority, ranging from 0 to 65,535.
Description
Use the lacp port-priority command to set the priority of the current port.
Use the undo lacp port-priority command to restore the default port priority.
By default, the port priority is 32,768.
You can use the display link-aggregation verbose command or the display link-aggregation
interface command to check the configuration result.
Example
# Set the priority of Ethernet1/0/1 to 64.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Ethernet1/0/1
[Sysname-Ethernet1/0/1] lacp port-priority 64

lacp system-priority

Syntax
lacp system-priority system-priority
undo lacp system-priority
View
System view
Parameter
system-priority: System priority, ranging from 0 to 65,535.
Description
Use the lacp system-priority command to set the system priority.
Use the undo lacp system-priority command to restore the default system priority.
By default, the system priority is 32,768.
Example
# Set the system priority to 64.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] lacp system-priority 64

link-aggregation group description

Syntax
link-aggregation group agg-id description agg-name
1-6