Qinq Ethernet-Type Customer-Tag - H3C S7500E Series Command Reference Manual

[Sysname-port-group-manual-1] group-member gigabitethernet 2/0/1 to gigabitethernet 2/0/6
[Sysname-port-group-manual-1] qinq enable

qinq ethernet-type customer-tag

Syntax
qinq ethernet-type customer-tag hex-value
undo qinq ethernet-type customer-tag
View
System view
Default Level
2: System level
Parameters
customer-tag: Indicates the TPID value in the CVLAN tag.
hex-value: Hexadecimal protocol type value, in the range of 0x0001 to 0xFFFF. However, do not set it
to any of the protocol type values listed in
Table 18-1 Common protocol type values
ARP
PUP
RARP
IP
IPv6
PPPoE
MPLS
IPX/SPX
IS-IS
LACP
802.1X
Cluster
Reserved
Description
Use the qinq ethernet-type customer-tag command to configure the TPID value in CVLAN tags.
Protocol type
Table 18-1..
0x0806
0x0200
0x8035
0x0800
0x86DD
0x8863/0x8864
0x8847/0x8848
0x8137
0x8000
0x8809
0x888E
0x88A7
0xFFFD/0xFFFE/0xFFFF
18-3
Value