Show Ipv6 Protocols Rip - Allied Telesis IE340 Series Command Reference Manual

RIP IP 6 C
NG FOR V OMMANDS
6
SHOW IPV PROTOCOLS RIP

show ipv6 protocols rip

Overview Use this command to display RIPng process parameters and statistics.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax show ipv6 protocols rip
Mode User Exec and Privileged Exec
Example To display RIPng process parameters and statistics, use the following command:
awplus#
Output Figure 27-1: Example output from the show ipv6 protocols rip command
C613-50631-01 Rev A
show ipv6 protocols rip
awplus#show ipv6 protocols rip 
Routing Protocol is "RIPng"
Sending updates every 30 seconds with +/-5 seconds, next due 
in 6 seconds
Timeout after 180 seconds, garbage collect after 120 seconds
Outgoing update filter list for all interface is not set
Incoming update filter list for all interface is not set
Default redistribute metric is 1
Redistributing:
Interface
vlan3
Routing for Networks:
fe80::200:cdff:fe27:c086 vlan1
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x

"Getting Started
Guide.
1096