Ipv6 Nd Route-Information - Allied Telesis IE340 Series Command Reference Manual

IP 6 C
V OMMANDS
6 -
IPV ND ROUTE INFORMATION

ipv6 nd route-information

Overview Use this command to supply more specific route information to be included in the
RA (Router Advertisement) the device sends to downstream devices on the same
link/LAN.
Use the no variant of this command to remove some or all route information.
Syntax ipv6 nd route-information <ipv6-prefix/length>
[<0-4294967295>|infinity|default] [low|medium|high]
ipv6 nd route-information <ipv6-prefix/length>
no ipv6 nd route-information <ipv6-prefix/length>
no ipv6 nd route-information all
Default No route information option is included in router advertisement on any interface.
Mode Interface Configuration for a VLAN interface or a local loopback interface.
Example To configure a route of 2001:DB8:1::/48 on vlan2, with a lifetime of 6000 seconds
and a high preference, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
6000 high
Related ipv6 nd suppress-ra
commands
Command Version 5.5.0-2.4: command added
changes
C613-50631-01 Rev A
Parameter
<ipv6-prefix/length>
<0-4294967295>|
infinity|default
low|medium|high
configure terminal
int vlan2
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Description
The IPv6 network prefix and prefix length entered in
dotted decimal format for the IPv6 network prefix, then
slash notation for the IPv6 prefix length in the format
X:X::X:X/ M, e.g. 2001:db8::/64
The length of time in seconds (relative to the time the
packet is sent) that the prefix is valid for route
determination.
• infinity - specifies that the route advertisement has an
infinite lifetime.
• default - is 3 * MaxRtrAdvInterval
The preference value for the route information
ipv6 nd route-information 2001:DB8:1::/48
982