Show Radius Remote-Circuit-Id-Delimiter - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

show radius remote-circuit-id-delimiter

Syntax
Release Information
Description
Mode
Copyright © 2010, Juniper Networks, Inc.
show radius remote-circuit-id-delimiter
Command introduced before JunosE Release 7.1.0.
Displays the delimiter character that the router uses to set off components in the PPPoE
remote circuit ID value sent from a DSLAM and captured on the router. The default
delimiter character is #.
Privileged Exec
Chapter 7: S Commands
1085