Show Redundancy - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

show redundancy

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
show redundancy [ brief | detail ] [ filter ]
Command introduced before JunosE Release 7.1.0.
Displays the supported redundancy modes as well as other status relating to high
availability. In particular, the output indicates any conditions that are preventing the
operational mode from being high availability.
brief—Displays summary redundancy information for line modules, SRP modules, or
both
detail—Displays detailed information for line modules, SRP modules, or both
filter—See Filtering show Commands on page 4
Privileged Exec
Chapter 7: S Commands
1097