Table of Contents
Advertisement
JunosE 11.3.x Command Reference Guide N to Z
show redundancy line-card
Syntax
Release Information
Description
Options
Mode
1100
show redundancy line-card [ slot slotNum ] [ filter ]
Command introduced before JunosE Release 7.1.0.
slot keyword and slotNum variable added in JunosE Release 11.3.0.
Displays redundancy information specific to line modules, including supported redundancy
modes and high availability status for a line module installed in a particular slot. If you
enter this command without the slot keyword, redundancy details for all line modules
on a router are displayed.
slotNum—Number of the slot in which the line module resides in the router; for the E120
router, a number in the range 0–5; for the E320 router, a number in the range 0–5 or
11–16
filter—See Filtering show Commands on page 4
Privileged Exec
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
