Show Redundancy History - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

show redundancy history

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
show redundancy history [ srp ] [ line-card [ slot slotNum ] ] [ detail ] [ filter ]
Command introduced before JunosE Release 7.1.0.
line-card and slot keywords and slotNum variable added in JunosE Release 11.3.0.
Displays information about dates, times, and the number of occurrences for starts and
switchovers for an SRP module and for a line module installed in a particular slot. If you
enter this command without the slot keyword, redundancy details for all line modules
on a router are displayed.
srp—Displays history information specific to the SRP modules
line-card—Displays the configuration for line module redundancy
slotNum—Number of the slot in which the line module resides in the router; for the E120
router, a number in the range 0–5; for the E320 router, a number in the range 0–5 or
11–16
detail—Displays detailed history information
filter—See Filtering show Commands on page 4
Privileged Exec
Chapter 7: S Commands
1099