JunosE 11.3.x Command Reference Guide N to Z
show redundancy clients
Syntax
Release Information
Description
Options
Mode
1098
show redundancy clients [ all | supported | unsafe | unsupported ] [ filter ]
Command introduced before JunosE Release 7.1.0.
Displays high availability clients and their various levels of high availability support.
all—Displays all clients registered with high availability
supported—Displays only clients that are supported by high availability
unsafe—Displays only clients with an unsafe high availability state
unsupported—Displays only clients that are not supported by high availability.
filter—See Filtering show Commands on page 4
Privileged Exec
Copyright © 2010, Juniper Networks, Inc.