Show Bgp Ipv6 Neighbors - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

show bgp ipv6 neighbors

show bgp ipv6
Syntax
[ unicast | multicast | vpnv6 all | vpnv6 vrf vrfName | route-target signaling ]
neighbors [ ipAddress | ipv6Address ] [ delta ] [ filter ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
ipv6Address variable added in JUNOSe Release 8.0.0.
route-target signaling keywords added in JUNOSe Release 8.2.0.
Displays information about BGP neighbors.
Description
Options
Privileged Exec, User Exec
Mode
unicast Specifies the IPv6 unicast address family and routing table; the default
option
multicast Specifies the IPv6 multicast address family and routing table
vpnv6 all Specifies the VPN-IPv6 address family and all IPv6 VPN routing and
forwarding instances
vpn6 vrf vrfName Specifies the VPN-IPv6 address family and only the IPv6 VPN
routing and forwarding instance with the name vrfName
route-target signaling Specifies the route-target address family
ipAddress IP address of a neighbor whose routes the router has learned
ipv6Address IPv6 address of a neighbor whose routes the router has learned
delta Displays baselined statistics
filter See Filtering show Commands on page 4
Chapter 7: S Commands
show bgp ipv6 neighbors
581