JunosE 11.3.x Policy Management Configuration Guide
Meaning
190
In Received Packets 0, Bytes 0
Unicast Packets 0, Bytes 0
Multicast Packets 0, Bytes 0
In Total Dropped Packets 0, Bytes 0
In Policed Packets 0
In Invalid Source Address Packets 0
In Error Packets 0
In Discarded Packets 0
Out Forwarded Packets 8, Bytes 768
Unicast Packets 8, Bytes 768
Multicast Routed Packets 0, Bytes 0
Out Total Dropped Packets 5, Bytes 0
Out Scheduler Dropped Packets 0, Bytes 0
Out Policed Packets 0
Out Discarded Packets 5
IPv6 policy input ipv6InPol25
rate-limit-profile Rlp2Mb classifier-group clgA entry 1
Committed: 0 packets, 0 bytes
Conformed: 0 packets, 0 bytes
Exceeded:
0 packets, 0 bytes
rate-limit-profile Rlp8Mb
Committed: 0 packets, 0 bytes
Conformed: 0 packets, 0 bytes
Exceeded:
0 packets, 0 bytes
IPv6 policy output ipv6PolOut2
rate-limit-profile RlpOutA classifier-group clgB entry 1
Committed: 0 packets, 0 bytes
Conformed: 0 packets, 0 bytes
Exceeded:
0 packets, 0 bytes
rate-limit-profile RlpOutB
Committed: 0 packets, 0 bytes
Conformed: 0 packets, 0 bytes
Exceeded:
0 packets, 0 bytes
IPv6 policy local-input ipv6PolLocIn5
rate-limit-profile Rlp1Mb classifier-group clgC entry 1
Committed: 0 packets, 0 bytes
Conformed: 0 packets, 0 bytes
Exceeded:
0 packets, 0 bytes
rate-limit-profile Rlp5Mb
Committed: 0 packets, 0 bytes
Conformed: 0 packets, 0 bytes
Exceeded:
0 packets, 0 bytes
queue 0: traffic class best-effort, bound to ipv6 FastEthernet9/0.6
Queue length 0 bytes
Forwarded packets 0, bytes 0
Dropped committed packets 0, bytes 0
Dropped conformed packets 0, bytes 0
Dropped exceeded packets 0, bytes 0
Table 39 on page 190 lists the show ipv6 interface command output fields.
Table 39: show ipv6 interface Output Fields
Field Name
Description
Network Protocols
Field Description
Optional description for the interface or address
specified
Network protocols configured on this interface
Copyright © 2010, Juniper Networks, Inc.
Need help?
Do you have a question about the JUNOSE SOFTWARE FOR E SERIES 11.3.X - POLICY MANAGEMENT CONFIGURATION GUIDE 2010-10-04 and is the answer not in the manual?