Clear Ipv6 Neighbors - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

clear ipv6 neighbors

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
clear ipv6 neighbors [ include-statics | statics-only ]
Command introduced before JunosE Release 7.1.0.
Clears all IPv6 dynamic neighbors. The include-statics keyword clears both dynamic
neighbors and static neighbors. The statics-only keyword clears only IPv6 static neighbors.
There is no no version.
include-statics—Clears both dynamic and static neighbors
statics-only—Clears only static neighbors
Privileged Exec
Chapter 4: C Commands
407