Setting The Maximum Number Of Real-Time Accounting Attempts; Configuring Radius Stop-Accounting Packet Buffering - H3C SR8800-F Configuration Manual

Step
3. Set the maximum number of
RADIUS request transmission
attempts.
Setting the maximum number of real-time accounting
attempts
If you specify a maximum number of real-time accounting attempts, the device will disconnect users
from which no accounting responses are received within the permitted attempts.
To set the maximum number of real-time accounting attempts:
Step
1. Enter system view.
2. Enter RADIUS scheme view.
3. Set the maximum number of
real-time accounting attempts.

Configuring RADIUS stop-accounting packet buffering

The device sends RADIUS stop-accounting requests when it receives connection teardown requests
from hosts or connection teardown commands from an administrator. However, the device might fail
to receive a response for a stop-accounting request in a single transmission. Enable the device to
buffer RADIUS stop-accounting requests that have not received responses from the accounting
server. The device will resend the requests until responses are received.
To limit the transmission times, set a maximum number of transmission attempts that can be made
for individual RADIUS stop-accounting requests. When the maximum attempts are made for a
request, the device discards the buffered request.
To configure RADIUS stop-accounting packet buffering:
Step
1. Enter system view.
2. Enter RADIUS scheme view.
3. Set the maximum number of
real-time accounting attempts.
4. Enable buffering of RADIUS
stop-accounting requests to
which no responses have been
received.
5. (Optional.) Set the maximum
number of transmission
attempts for individual RADIUS
stop-accounting requests.
Command
retry retries
Command
system-view
radius scheme
radius-scheme-name
retry
realtime-accounting
retries
Command
system-view
radius scheme
radius-scheme-name
retry
realtime-accounting
retries
stop-accounting-buffer
enable
retry stop-accounting
retries
28
Remarks
The default setting is 3.
Remarks
N/A
N/A
The default setting is 5.
Remarks
N/A
N/A
The default setting is 5.
By default, the buffering feature is
enabled.
The default setting is 500.