Common Probe Commands; Display Hardware Internal Dump; Display Hardware Internal Physical - H3C MSR Series Probe Command Reference

Common probe commands

display hardware internal dump

Use display hardware internal dump to display the dump register information of a chip.
Syntax
display hardware internal dump if-name [ card ] chip chip-num [ global | channel ]
Views
Probe view
Predefined user roles
network-admin
network-operator
Parameters
if-name: Specifies a registered interface or controller by its name.
card: Specifies the card system.
chip-num: Specifies a chip by its number in the range of 0x00 to 0xFF.
global: Specifies the global register.
channel: Specifies the channel register.
Usage guidelines
This command reads the DUMP register information of the specified chip, one group of values each time.

display hardware internal physical

Use display hardware internal physical to display the dump software information.
Syntax
display hardware internal physical if-name [ boardinfo | intinfo | intinfo-priv | rxbd | statistic | txbd ]
Views
Probe view
Predefined user roles
network-admin
network-operator
Parameters
if-name: Specifies a registered interface or controller by its name.
boardinfo: Displays main board information.
intinfo: Displays basic interface information.
1