Operation (Http Operation View); Operation Interface - H3C SR6600 Command Reference Manual

Default command level
2: System level
Parameters
get: Gets a file from the FTP server.
put: Transfers a file to the FTP server.
Examples
# Specify the operation type for the FTP operation as put.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type ftp
[Sysname-nqa-admin-test-ftp] operation put

operation (HTTP operation view)

Use operation to specify the operation type for the FTP operation.
Use undo operation to restore the default.
Syntax
operation { get | post }
undo operation
Default
The operation type is get.
Views
HTTP operation view
Default command level
2: System level
Parameters
get: Gets data from the HTTP server.
post: Transfers data to the HTTP server.
Examples
# Specify the operation type for the HTTP operation as post.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type http
[Sysname-nqa-admin-test-http] operation post

operation interface

Use operation interface to specify the interface to perform the DHCP operation. The specified interface
must be up. Otherwise, no probe packets can be sent out.
Use undo operation interface to restore the default.
39