Check Before Power-On - H3C S7502 Installation Manual

Installation Manual
H3C S7502 Ethernet Switch
Figure 5-6 Setting terminal emulation mode in the property setting window
5.2 Power-on

5.2.1 Check before Power-on

Before powering on an Ethernet Switch, check that:
The switch has been mounted steadily.
All the cards have been correctly installed.
All the communication cables, fibers, power cables, and grounding cables have
been correctly connected.
The voltage of power supply meets the requirements on the switch.
The Console cable has been correctly connected. The computer or terminal for
configuration has been started and the terminal parameter settings have been
done.
Chapter 5 System Commissioning
5-5