Certificate Request Url - H3C S3100 Series Command Manual

Use the undo certificate request polling command to restore the defaults.
By default, the polling is executed every 20 minutes for up to 5 times.
After an applicant makes a certificate request, the CA may need a long period of time if it verifies the
certificate request manually. During this period, the applicant needs to query the status of the request
periodically to get the certificate as soon as possible after the certificate is signed.
Related commands: display pki certificate.
Examples
# Specify the polling interval as 15 minutes and the maximum number of attempts as 40.
<Sysname> system-view
[Sysname] pki domain 1
[Sysname-pki-domain-1] certificate request polling interval 15
[Sysname-pki-domain-1] certificate request polling count 40

certificate request url

Syntax
certificate request url url-string
undo certificate request url
View
PKI domain view
Parameters
url-string: URL of the server for certificate request, a case-insensitive string of 1 to 225 characters. It
comprises the location of the server and the location of CGI command interface script in the format of
http: //server_location/ca_script_location, where server_location must be an IP address and does not
support domain name resolution currently.
Description
Use the certificate request url command to specify the URL of the server for certificate request
through SCEP.
Use the undo certificate request url command to remove the configuration.
By default, no URL is specified for a PKI domain.
Examples
# Specify the URL of the server for certificate request.
<Sysname> system-view
[Sysname] pki domain 1
[Sysname-pki-domain-1]
http://169.254.0.100/certsrv/mscep/mscep.dll
certificate
1-5
request url