Ppp Acfc Local-Request; Ppp Acfc Remote-Reject - H3C MSR810 Command Reference Manual

• 2000 to 2999 are numbers for basic IPv4 and IPv6 ACLs.
• 3000 to 3999 are numbers for advanced IPv4 and IPv6 ACLs.
If the specified ACL number corresponds to an IPv4 ACL and an IPv6 ACL, both ACLs take effect.
name acl-name: Specifies an ACL by its name, a case-insensitive string of 1 to 63 characters that
start with an alphabetical character. To avoid confusion, do not use all as an ACL name.
Examples
# Enable PPP accounting on Serial 2/1/0.
<Sysname> system-view
[Sysname] interface serial 2/1/0
[Sysname-Serial2/1/0] ppp account-statistics enable

ppp acfc local-request

Use ppp acfc local-request to configure an interface to send ACFC requests by including the ACFC
option in outbound LCP negotiation requests.
Use undo ppp acfc local-request to restore the default.
Syntax
ppp acfc local-request
undo ppp acfc local-request
Default
An interface does not include the ACFC option in outbound LCP negotiation requests.
Views
Interface view
Predefined user roles
network-admin
Examples
# Configure Serial 2/1/0 to send ACFC requests to the peer in PPP negotiation.
<Sysname> system-view
[Sysname] interface serial 2/1/0
[Sysname-Serial2/1/0] ppp acfc local-request

ppp acfc remote-reject

Use ppp acfc remote-reject to configure an interface to reject ACFC requests received from the
remote peer.
Use undo ppp acfc remote-reject to restore the default.
Syntax
ppp acfc remote-reject
undo ppp acfc remote-reject
Default
An interface accepts ACFC requests received from the remote peer, and it performs ACFC on
frames sent to the peer.
15