Delta AX Series Instruction Manual page 436

AX- Ser i es Mo t i o n Co n t r o l l er I n s t r u c t i o n s Ma n u a l
How to use MC_ReadBoolParameter_DML to read the number of an EtherCAT object dictionary.

Use the SHL instruction to shift the data length of the object dictionary to be read to the left by 24 bits

Use the SHL instruction to shift the index of the object dictionary to be read to the left by 8 bits

Add up the above parameters and the sub-index.

See the reference formula as follows.
diParameterNumber: = - DWORD_TO_DINT (SHL (TO_DWORD (object dictionary data length), 24) + SHL

(TO_DWORD (object dictionary index), 8) + object sub-index);
To read an axis parameter value, refer to the axis parameter AXIS_REF_DML (FB) and fill in its number in the

diParameterNumber input parameter.
Troubleshooting

When an error occurs in the execution of the instruction, bError will change to True. To confirm the current error state,

see the Error Code in ErrorID.
Programming Example

For the example, refer to the programming example of the MC_ReadParameter function block.

For function block Axis parameters, enter that of the positioning axis.

Ch a p t er 2
4 3 1