Delta AX Series Instruction Manual page 313

AX- Ser i es Mo t i o n Co n t r o ll er I n s t r uc t i o ns Ma n u a l
Inputs/Outputs

Name Function
Tappet signal
Tappets
source
*Note:
SMC_TappetData (STRUCT): the internal interface between MC_CamIn and SMC_GetTappetValue for tappet data
transmission.
Name
Specify the direction in which a
ctt tappet point is passed so that
there will be an action then.
Specify the action when the
cta
tappet point is passed.
Specify the delay time before the
dwDelay
tappet changes to ON under
TAPPETACTION_time mode.
For how long the tappet is ON
dwDuration under TAPPETACTION_time
mode.
iGroupID Specify the track ID of the tappet.
x Tappet position
dwActive The internal variable
Function

Data Type
SMC_TappetData
Function
Setting Value
SMC_TappetData*
Data Type
SMC_CAMTAPPETTYPE
SMC_CAMTAPPETACTION
DWORD
DWORD
INT
LREAL
DWORD
Ch a p t er 2
Timing to Take Effect
When bEnable turns to True.
Setting range
(Default Value)
0: TAPPET_pos (pass in the
positive direction)
1: TAPPET_all (pass in both
positive and negative directions)
2: TAPPET_neg (pass in the
negative direction)
(TAPPET_pos)
0: TAPPETACTION_on (switch to
ON)
1: TAPPETACTION_off (switch to
OFF)
2: TAPPETACTION_inv (Invert)
3: TAPPETACTION_time (be ON
for a period of time and then
switch to OFF.)
(TAPPETACTION_on)
Positive or 0
(0)
Positive or 0
(0)
Positive, negative or 0
(0)
Positive, negative or 0
(0)
Positive or 0
(0)
3 0 8